Mantis ComposT-Twin Benutzerhandbuch Seite 45

5 4
Step 1
Parts for the support
frame assembly
Gather the parts you will
need to assemble the support
frame.
Step 2
Fasten one end of the short spacer (key No.2) to "C"
shaped lower support (key No.1) with 2" shoulder bolt
(key No.12). Finger tighten - do not completely tighten
nuts and bolts.
2
7
6
11
12
KEY NO.
1
2
3
4
5
6
7
8
9
10
11
12
9
8
10
DESCRIPTION
"C" shaped lower support
Short spacer (lower support)
Upper support with
axle rod guides
Long spacer (upper support)
Axle rod
Centre support wheel
Gear
Handle
Plastic grip
Push cap nut
Spring pin
2" (51 mm) long
shoulder bolt
Long legs of the tubing are opposite each other
Step 3
Place second "C" shaped lower support in
a position where the long legs of the tubing are
diagonally opposite each other, as shown. Fasten the
other end of the short spacer to the second "C"
shaped lower support. Repeat this step on the other
side.
GB
1
3
QTY PART NO.
2 200100
2 200101
2 200102
2 200103
2 200115
2 200107
4 200105
1 200108
1 200109
1 200110
4 200106
8 200500
Close-up
45