Charging The Appliance - Panasonic ES2063 Bedienungsanleitung

Charging
1. Plug the charger into the epilator () and a
household outlet ().
2. Charge the appliance for approximately 1 hour.
(Charging is completed when the charging light
blinks.)
•
•
The charge light may not turn on after a few minutes in some cases.
However, it will turn on eventually if you continue charging.
•
The appliance can be left plugged in after it is fully charged without
deteriorating the battery life.
•
The recommended charge temperature is 15-35 °C.
If you use the charger in temperature outside of the recommended range,
the following problems might occur.
-
The time it takes to charge the appliance increases. (approximately 3
hours)
-
The charger stops functioning.
•
If you use the charger in low temperature, the battery life might be
reduced.
•
The charger can be positioned in a vertical or horizontal position.
Using
This epilation head is for legs/arms, so do not use it to your
underarms and bikini-line.
•
Trim your hair before epilating for the fi rst time or if you have not epilated
for a long time.
•
The recommended use temperature is 5-35 °C.
If you use the appliance in temperature outside of the recommended
range, it may stop functioning or might reduce the operating time.
1. Wet your skin.
4
ES2063_EU.indb 4

Charging the appliance

The epilator can be used for approximately 30
minutes after 1 hour charge.
•
While charging: Red light appears.
•
After charging is completed:
Blinks once every second.
•
10 minutes after charging is completed:
Blinks once every 2 seconds.
•
Abnormal Charging: Blinks twice every second.
Wet/foam epilation


2008/07/02 20:49:16