-
Rotate the clip and press it down as far as it will go.
It is difficult to press the clip down fully if the fixing
cable has not been properly re-positioned.
-
After fully closing the push-pull connection, insert the
shear pin into the relative hole shown in the figure.
-
Connect the cable terminal
-
Secure the cable to the appliance using the clamping devi-
ce provided.
-
Mount the large handle.
Connecting the condensate drain hose
- Connect an insulated drain pipe (øi 16 mm) to the
outlet pipe connection and take to a suitable place for
drainage.
- Check that the condensate flows out regularly.
Check all the joints for leaks.
Lag the joints.
Avoid upturned sections.
When all the parts have been installed, power the installa-
tion by plugging the indoor unit into the mains socket.
SINGLE SPLIT
Cable clamp
Terminal
ENGLISH
15