-
Loosen the fixing screw indicated by the arrow.
-
Press the handle downwards and remove the panel pro-
tecting the terminals in order to carry out the electrical
connection.
-
The user must remove the tamperproof closures indi-
cated in the figure before installation.
-
Take off the clip from the push-pull connector (male
plug).
-
Pull the ferrule inwards as indicated by the arrow.
Before carrying out the connection remove
the cover protecting the connections by sli-
ding back the lockout.
-
Insert the push-pull connector (male plug) into the
female socket and re-position the fixing cable at the
same time.
The locating pin must be facing downwards.
ENGLISH
14
screw
Locating pin
Ferrule
Clip
SINGLE SPLIT