Control Panel; On/Off Button; Setting The Clock - KKT KOLBE Cube Benutzerhandbuch

Control panel

5. Control panel

On/off button:

In standby mode, press the button
for 0.5 seconds to activate the control
panel.
In operating mode, press the key briefly
to stop the motor, press it for a few se-
conds to switch off the appliance.
"Wind" key:
After switching on the unit, briefly press
the wind button to adjust the power
level; each time the button is pressed,
the level will change once
from „low" to „medium" to „high" and
back to „low" again.
The LCD display will also show the speed
column from „low" to „high".
To switch to high-performance level
TURBO, press this button for 1 second.
You will hear two beeps and the display
will show TURBO. The appliance will now
work at the maximum level for 5 minu-
tes, then it will switch back to „high".
30
Lighting:
Press this button to turn on/off the
lights.

Setting the clock:

Press and hold the
mode to start the time setting.
The hour display will flash first.
Set the hour by pressing the
buttons. Now press the
The minute display will start flashing
and you can set the minutes by using the
and buttons.
When you have finished setting the time,
either wait 10 seconds or press the
button to confirm.
button in standby
and
button again.