Operating The Hood; Control Panel - KKT KOLBE BICOLORE Benutzerhandbuch

Operating the hood

4. Operating the hood

4.1 Control panel

On / Off
In standby mode, press the
0.5 seconds to switch on the appliance.
Operation starts at level 1 (low).
In operating mode, you can stop fan
operation by briefly pressing the
and switch the unit to standby mode by
holding it down for a few seconds.
Setting the power level
After switching on the appliance, briefly
press the key to adjust the power
level; each time the key is pressed,
the level will change once as follows:
level 1 (low) > level 2 (medium)
> level 3 (high) > level 1 ...
The power column
speed of the icon indicate the current
power level on the display.
To switch to high-performance level
TURBO, press the
You will hear two beeps and the display
will show . The appliance will now
operate at the maximum level for 5
minutes.
To deactivate the TURBO level before this
time has elapsed, press the
The appliance will change to level 1.
key for
key
and the rotation
key for 1 second.
key briefly.
Lighting
By briefly pressing the
you can switch between the following
lighting modes:
Working light + RGB lighting > working
light > RGB lighting > Off .
The display icon indicates the active
lighting status.
Setting the light colour / RGB
Pressing the and
ously will take you to the light setting.
In setting mode, the first two letters of
the clock show „E0".
By pressing and
the color of the RGB lights. The corres-
ponding code appears on the display as
follows:
L1 white L4 blue
L2 red L5 yellow L8 cyan
L3 green L6 purple L9 grass green
After choosing the colour you want to
keep, press and
the setting.
key each time
keys simultane-
you can adjust
L7 orange
again to confirm
33