Before installation
If all these checks fail to remedy the fault,
it is possible you have a more serious
problem.
In no circumstances try to repair the
electronic/electrical components in the
appliance.
Contact your Customer Service.
9. Before installation
1 Clean the area thoroughly before installation, no dust or debris can be
!
aspirated.
2 The exhaust hose must not be routed together with gas pipes, hot-air
pipes, etc. through a chute.
3 The exhaust tube should be as straight as possible carried away from the
cover and guided at a maximum deflection of 120 ° towards the outside and
secured to the outer wall.
4 In order to avoid accumulations of fat in a corner, make sure when instal-
ling that the hood is suspended horizontally.
Circulating air filter mode
8.1 Customer service
For technical queries concerning your
appliance please contact the customer
service office of your dealer.
The type and rating plate is located in-
side the appliance (remove the grease
filter)
Install the carbon
filter (s) before
installing the
grease filters.
35