Control Panel - KKT KOLBE CUBE Benutzerhandbuch

Control panel

5. Control panel
On / Off
In standby mode, press the
0.5 seconds to switch on the appliance.
Operation starts at level 1 (low).
In operating mode, you can stop fan
operation by briefly pressing the
and switch the unit to standby mode by
holding it down for a few seconds.
Setting the power level:
After switching on the appliance, briefly
press the key to adjust the power
level; each time the key is pressed,
the level will change once as follows:
level 1 (low) > level 2 (medium)
> level 3 (high) > level 1 ...
The power column
speed of the icon indicate the current
power level on the display.
To switch to high-performance level
TURBO, press the
You will hear two beeps and the display
will show . The appliance will now
operate at the maximum level for 5
minutes.
To deactivate the TURBO level before this
time has elapsed, press the
The appliance will change to level 1.
30
key for
key
and the rotation
key for 1 second.
key briefly.
Lighting:
Press the key to turn on/off the
lights. The display icon
active lighting status.
Setting the clock:
Press and hold the
operation to start the time setting.
The hour display will flash first.
Set the hour by pressing the
keys. Now press the
The minute display will start flashing
and you can set the minutes by using the
and keys.
When you have finished setting the time,
either wait 5 seconds or press the
key to confirm.
indicates the
key without fan
and
key again.