Problems And How They Can Be Solved - SOLIS JH-926SBD Bedienungsanleitung

SOLIS Rice Cooker engl._2014 16.03.14 21:32 Seite 104
P R O B L E M S A N D H O W T H E Y C A N
▲
B E S O LV E D
PROBLEM
The Rice Cooker Duo
Program suddenly swit-
ches off
The rice is too dry/hard
after cooking.*
The rice is too moist after
cooking. *
* Because rice varieties differ in their composition and consistency, results may be different. These tips help you with
cooking ideal rice for you.
104
SOLUTION
• Check, if the connection adapter resp. power plug is
properly fixed to the appliance jack resp. power out-
let.
• The appliance has been overstrained or has over-
heated. Separate the appliance from the mains and
let it cool down for a few minutes. Then, plug it back
in and switch it on with the
cooking process.
• If the rice is too dry or hard at the end of the cook-
ing program, it can be softened by adding extra
water or additional cooking time. Depending on how
hard your rice still is, add 1/2 to 1 measuring cups of
water and stir thoroughly. Close the lid and switch
the „White Rice" or „Brown Rice" setting on again.
When the rice cooker switches to „Keep Warm"
mode, open the lid and stir the rice. Possibly, letting
the rice stand for 10 – 15 minutes in „Keep Warm"
mode, will do.
• If the rice is too moist/wet at the end of the cooking
program, stir it with the scoop. By doing so, the
moistest part will be spread out at the bottom and
moisture is allowed to escape. Close the lid and let
the appliance in „Keep Warm" mode for 10 – 30
minutes. Occasionally open the lid and stir the rice
to let excessive moisture escape.
button. Restart the