Button Beep; Call Ringer; Keypad Lock - Albrecht Tectalk Smart XL Bedienungsanleitung

Microphone Gain Selection
When you like to increase or reduce your voice sensitivity through the
internal microphone (e.g. for motor bike (Lo) or home (Hi) use):
•
From standby mode press the MODE button 4 times; the
flashing of microphone gain (MIC-H) appears with high (Hi) or
low (Lo).
•
Press the Up or Down button to select Hi or Lo.
•
When the Hi is selected the microphone gain icon (MIC-H)
appears.
•
Press the PTT button momentarily to confirm the selection.
Button Beep (keytone)
This feature allows the transceiver to sound a confirmation tone
whenever the following keys are pressed: Power On/Off/Scan Button,
Up/Down Buttons and MODE Button.
This feature is always on.

Call Ringer

The transceiver provides a transmit call ring melody to alert other users
of an incoming call. From standby mode pressing the PTT button twice
in quick succession will transmit the call ringer melody.

Keypad Lock

The lock function is to avoid the accidental changes of radio settings.
Only POWER On/Off, the PTT and Volume Up/Down buttons will
operate while lock function is enabled.
To set the keypad lock operation:
•
From standby mode press and hold the MODE button for 2
seconds or until the lock icon ( ) appears on the display.
•
To disable the lock operation press and hold the MODE button for
at least 2 seconds; the lock icon ( ) will disappear
10