Monitor; Lock & Unlock The Device; The Menu; Changing Channels - Albrecht Tectalk Sport Bedienungsanleitung

6.5. Monitor

In case you lose contact to another radio or the transmission can only be heard in fractions, acti-
vating the monitor function is recommended. Press MONI to activate or deactivate this function.
When no transmission is heard, activating this function will result in a loud noise.
6.6. Lock & Unlock the device
Press and hold CALL button for 6 seconds to lock the device.
Press and hold CALL button for 3 seconds to unlock the device.

7. The Menu

To enter the Menu press MENU/PWR. Press it again to go to the next menu option. Selections are
confirmed by either pressing MONI or waiting for 10 seconds.

7.1. Changing Channels:

To change channels, once you have turned your unit on, you need to press the MENU/PWR once
and use the UP/DOWN buttons to select your desired channel. To set your the channel, press the
MONI button or wait for 10 seconds.

7.2. CTCSS/DCS Tones

This feature is used to gain more privacy on the public channels.
With CTCSS or DCS tones activated the radio will only play transmissions of other radios which are
using the same tone. All other transmissions are discarded and cannot be heard.
In case you want to hear all transmissions again you need to select tone 00.

7.3. VOX

When the VOX-function is activated, the radio will automatically start the transmission when you are
speaking into the microphone. Three sensitivity levels are available.
Note: This function is also reacting to environmental noise, which may lead to permanent transmis-
sion.

7.4. Call tone

You can use the CALL button to send a tone to other users on the same channel.
When the unit is in receiving mode, press and release the CALL button. The unit will transmit a
2-second Call tone.

7.5. Time-Out-Timer

The Time-Out-Timer is preventing the user to accidentally transmit for long periods. It can be set to
off, 30 or 60 seconds. When the transmission is longer than the selected time it is stopped and a
continuous beep tone is heard until the PTT is released.

7.6. Roger Beep

This is a tone which automatically transmits whenever the PTT button is released. This alerts the
receiving party that you have ended the transmission, and you are now in receive mode.

7.7. Beeptone

Deactivates/activates all Beeptones of the radio.

7.8. Dual Channel Mode

With the Dual Channel Mode (DCM) you can observe two channels simultaneously. In order to ac-
tivate this function set channel number and CTCSS/DCS code for the first channel. Then enter the
menu activate DCM and select channel number and CTCSS/DCS of the second channel. Now the
radio will automatically switch between those two channels. The transmission channel is the one
which is displayed the moment the PTT button is pressed.
Note: This function is reducing the operating time of the radio since it is preventing the radio from
entering the Power Save Mode.
14 English