Notes For Good Communication; Warning - Albrecht Tectalk Smart XL Bedienungsanleitung

Notes for good Communication

•
Tectalk Smart XL channels are shared on a 'take turns' basis. This
means other groups may be talking on any of the channels. A
common code of courtesy is to switch to another vacant channel
and not to attempt to talk over someone who is already using the
channel you first selected.
•
The radio has been designed to maximize performance and
improve transmission range in the field. To avoid interference it is
recommended that you do not use the units closer than 2 meters
away from each other.
•
To increase battery life use the SCAN feature only where
necessary. This feature will reduce operating time considerably.
10. Notes for Good Communication

Warning

•
Remove the batteries from the transceiver if it is not expected to be
used for long periods. This will eliminate the possibility of chemicals
leaking from the batteries and corroding the transceiver.
•
Avoid exposing the transceiver to water or extremes of
temperature.
•
Do not use this device in or near mining or factory facilities where
remotely triggered explosives are used or in areas labelled
"Blasting Area" or "Explosion Protected".
•
Do not attempt to modify or in any way increase the output of this
transceiver. Its output is designed to meet the legal limits.
•
Do not use this device or charge its batteries in potentially
explosive atmospheres.
•
Turn your transceiver off wherever posted notices restrict the use of
radios or cellular telephones.
•
Facilities such as hospitals may use equipment that is sensitive to
RF energy. Because of this reason most hospitals do not allow the
use of any private radio sets!
12