Down-Button; Operating Modes And Features; Pmr-Operation; Channel-Selection - Albrecht Tectalk Smart XL Bedienungsanleitung

the unit's settings.
Down Button
In the standby mode pressing this button will decrease the
listening volume. When in function edit mode this button will
be used to adjust the unit's settings.

Operating Modes and Features

PMR Operation
•
Press and hold the POWER On/Off button for 2 seconds to turn on
power.
•
Press the MODE button so the channel number flashes.
•
Select the desired channel with the Up and Down Buttons. The
Busy icon (BUSY) appears to indicate an incoming call.
•
Press and hold the PTT button to transmit, then speak into the
microphone clearly and slowly. The transmit icon ( ) appears on
the display while the button is pressed.
•
Release PTT button to receive.
•
Communication can only be accomplished when the channel and
CTCSS tone frequency of at least two parties are the same.
•
The CTCSS sub-channel (01-38) will be displayed on the LCD
panel if the CTCSS tone frequency function is enabled (not oF).
Channel Selection
•
From standby mode, press the MODE button once; the channel
number flashes.
•
Press the Up or down button briefly to move to the desired channel
number.
•
Press the PTT button momentarily to confirm selection.
8