Siemens SCALANCE W786-2HPW Betriebsanleitung Seite 79

Mounting
3.4 Mounting with mounting plate
Procedure
20
Siemens Drives & PLCs
1
A
2
Figure 3-9 Fitting and securing the cover plate for the cable feedthrough
To screw the cover plate for the cable feedthrough to the mounting plate, follow the steps
below:
1. Fit the cover plate on the mounting plate from below until the two lugs (position A in the
figure above) engage the lower edge of the mounting plate.
2. Secure the cover plate to the mounting plate with two M4 screws. The screws are
supplied with the assembly kit.
A
Operating Instructions (Compact), 06/2007, A5E01186485
SCALANCE W786-2HPW