SPX RD8000 Bedienungsanleitung Seite 20

Excessive electromagnetic interference can effectively limit the range of wireless
communication and / or corrupt data.
Your PDA device may have insufficient memory to maintain a wireless link, particularly if
the connection is sustained over an hour or longer. Make sure you quit applications on
your PDA using the method described in your device's documentation.
Although iLOC can successfully function at distances up to 300m (1000ft) in direct line
of sight, your PDA (or notebook) and the RD8000 must be within 10m (30ft) to maintain
a wireless connection.
Resetting connections
If you experience problems with the RD8000 wireless Bluetooth technology features,
Radiodetection recommends resetting the connection and then pairing your device again:
1. Press the key to enter the menu.
2. Scroll to the BT menu using the
3. Press the key to enter the BT menu.
4. Scroll up or down to the RESET menu.
5. Press the key and the locator will purge all current connections.
6. Re-pair your devices.
Bluetooth error codes
If an error occurs when attempting to perform any Bluetooth command using the locator
to the transmitter or the locator to a PC or PDA, the LCD will display a code to help you
resolve the problem on the locator.
The codes are as follows:
B T CO D E D E S CR I P T I O N
BT001 Bluetooth not configured for this unit
BT002 Internal Bluetooth error
BT003 Locator not paired with transmitter
BT004 Locator not paired with PC/PDA
BT005 Paired but connection attempt failed. Power cycling may be required
BT006 Corrupt response received from transmitter
BT007 Indeterminate response received from transmitter
BT008 No response received from transmitter
TX?? Transmitter unable to change to the requested frequency
or keys.
20