SPX RD8000 Bedienungsanleitung Seite 18

3. Press the key (locator) or the
4. Scroll up or down to the OFF option.
5. Press the key to switch Bluetooth off and return to the previous menu.
Pairing to a transmitter
To pair to a transmitter you require a Bluetooth enabled model such as the Tx-5B or Tx-10B.
Before you begin, you may choose to switch off all nearby Bluetooth equipment as they
may interfere with the locator and transmitter's pairing process.
On the locator:
1. Press the key to enter the menu.
Scroll to the BT menu using the
2.
3. Press the key to enter the BT menu.
4. Scroll to the PAIR menu and press the
5. Scroll to the BT-TX option.
NOTE: You must complete the pairing process within 90 seconds to prevent the
locator's Bluetooth connection from timing out.
On the transmitter:
6. Press the key to enter the menu.
7. Scroll to the BT menu using the
8. Press the key to enter the BT menu.
9. Scroll to the PAIR option.
Starting the pairing process:
10. Press the key on the transmitter followed by the
press these keys within a 30 second window otherwise the connection may time out.
11. The transmitter and the locator will now attempt to pair.
When pairing is in progress, the transmitter and locator will display a flashing Bluetooth
icon. Pairing can take up to a minute. If the pairing process is successful, the transmitter
will display the icon and the locator will display a persistent Bluetooth icon for the
duration of the connection.
If pairing fails, ensure that any nearby Bluetooth devices are switched off or invisible then
repeat the process.
Once the locator and transmitter have successfully paired you can use iLOC to change
the transmitter's output frequency and power levels remotely from the locator.
key (transmitter) to enter the BT menu.
or keys.
key to enter it.
or keys.
key on the locator. You must
18