Cleaning The Surfaces - GUTMANN Invisible Bedienungsanleitung

Cleaning the surfaces

Danger due to electric shock! Discon-
nect the extractor hood from the power
supply by pulling the plug out of the
socket or by switching off the fuse. Dur-
ing cleaning, make sure that no water
penetrates the device.
Timely cleaning of the surface saves the
later laborious removal of stubborn con-
tamination. Only use conventional de-
tergents or universal cleaning agents for
cleaning that are suitable for stainless
steel/aluminium. Never use abrasive
cleaning agents or steel wool. After
cleaning the hood, treat the stainless
steel surfaces with a stainless steel care
product.
Painted surfaces should only be
cleaned using a mild detergent solution
and a very soft cloth. Only clean the
operating panel with a soft damp cloth.
Grease deposits occur on the extraction
openings on hoods with slot extraction
in front of the metal filters. These de-
posits occur for physical reasons and
are due to a malfunction of the hood.
Please clean the this area of the hood
regularly to prevent the formation of
stubborn residues.
Cleaning and care instructions
When cleaning the grease filters, also
remove any grease deposits from the
accessible housing components. This
will prevent a fire hazard and maintain
an optimum range of functions. Use hot
soapy water or a mild window cleaning
agent to clean the hood. Do not scratch
off baked-on deposits. Soften them us-
ing a damp cloth. Do not use abrasive
agents or scouring pads.
Note: Do not use alcohol (spirits) on
plastic surfaces, as dull spots may re-
sult.
Caution: Ventilate the kitchen suffi-
ciently, no open flame.
Only clean the operating panel with a
soft damp cloth (mild detergent solu-
tion). Do not use stainless steel clean-
ers for the sliding switch/pressure
switch.
Stainless steel surfaces:
Use a mild and non-abrasive stainless
steel cleaning agent. Do not clean
stainless steel surfaces with abrasive
scouring pads or with cleaning agents
containing sand, soda, acid or chloride!
Clean in direction of polish only.
We recommend our stainless steel
cleaner no. 461731. See the enclosed
service booklet for the order address.
Aluminium, varnished and plastic surfaces:
Use a soft micro fibre cloth. Do not use
dry cloths. Use a mild window-cleaning
agent. Do not use aggressive cleaning
agents or agents containing acid or lye!
Do not use scouring agents.
en
15