Product Description - GUTMANN Invisible Bedienungsanleitung

en
Connecting the power supply
Check that the rated voltage indicated
on the appliance matches the mains
voltage in your area. Connection to the
incorrect voltage will damage or destroy
the appliance.
Before switching on the appliance,
check that all cables and lines are prop-
erly fitted and undamaged. Make sure in
particular that there are no kinks in the
cables, that they are not pulled too
tightly around corners and that no ob-
jects are resting on them. Also make
sure that all plug connections are se-
curely inserted. Faulty shielding or wir-
ing poses a health hazard (electric
shock) and can destroy other appli-
ances. Appliances with mains plugs are
fitted with a safety-tested mains cable
for the respective country of use and
may only be connected to a correctly
earthed safety socket. Otherwise, there
is a risk of electric shock. Make sure
that the socket on the appliance or the
domestic safety socket is easily accessi-
ble so that the mains cable can be un-
plugged from the socket in an emer-
gency or during servicing and mainte-
nance work.
Danger of electric shock!
Do not clean the hood with a steam
cleaner or water pressure cleaner. The
hood must be disconnected from the
power supply prior to cleaning.
Design
From an aesthetic perspective, the ex-
tractor hood may differ from the dia-
grams in these operating instructions.
However, the operating instructions,
maintenance, cleaning and installation
are always the same.
12
General method of operation
The Invisible has been specially devel-
oped for the extraction of cooking va-
pours in private households. The rising
cooking vapours are captured by the
extractor element, removed by slot ex-
traction and then directed to the metal
filter behind it. The metal filters are held
in the filter holder by means of magnets.
This type of slot extraction is very effec-
tive in capturing cooking vapours. The
metal filters in these hood models are
easily accessible from the front and can
be removed without the need for tools.
The extraction capacity is controlled via
the control panel. The control panel also
controls additional functions.

Product description