Herunterladen Inhalt Inhalt Diese Seite drucken

Care And Maintenance; Troubleshooting - Klarstein 10026898 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Cleaning Your Wine Cooler
• Wash the inside surfaces with warm water and baking soda solution. The solution should be about
2 tablespoons of baking soda with a quart of water.
• Wash the shelves with a mild detergent solution.
• Turn off the power, unplug the appliance, and remove all items including shelves and rack.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical
parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with
a clean soft cloth.
Power Failure
• Most power failures are corrected within a few hours and will not affect the temperature of your
appliance if you minimize the number of times the door is opened. If the power is going to be off
for a longer period of time, you need to take the proper steps to protect your contents.
Vacancy time
• Short vacancy: Leave the Wine Cooler stopping working for around three weeks.
• Long vacancy: If the appliance will not be used for several months, remove all items and turn off
the appliance. Clean and dry the interior thoroughly so as to restraint odors and mould. Leave the
door open slightly all the time if necessary.
Moving Your Wine Cooler
• Remove all items.
• Securely tape down all loose items (shelves) inside your appliance.
• Turn the adjustable leg up to the base to avoid damage.
• Make the door shut.
• Be sure the appliance stays secure in the upright position during transportation.
Also protect outside of appliance with a blanket, or similar item.
Energy saving Tips
• The Wine Cooler should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
PROBLEM
Wine Cooler does not operate.
Wine Cooler is not cold enough.
15

Care and Maintenance

Troubleshooting

POSSIBLE CAUSE
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
Check the temperature control setting.
External environment may require a higher set-
ting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

10026899

Inhaltsverzeichnis