Care And Maintenance; Troubleshooting; Environment Concerns; Declaration Of Conformity - Klarstein 10003444 Bedienungsanleitung

• Your cabinet is easy to operate and has proven its reliability; it will provide long-lasting satisfaction
if you follow the simple maintenance and cleaning operations listed below:
• Replace the activated charcoal fi lter in the upper ventilation hole of the cabinet half a year (your
dealer keeps this accessory in stock).
• Remove dust from the condenser (metal screen on the back of the cabinet) twice a year.
• Make sure the power cord is unplugged before cleaning the back of your cabinet, or before moving it.
• Clean the inside of your cabinet thoroughly once a year, after unplugging and unloading it (uses
water and a mild cleaning item, then rinse carefully).
NOTE: To assure that your wine cabinet provides long-lasting reliable performance, you should check
it regularly and inform your dealer if anything unusual is found.
Problem
Compressor does not start
even though the desired
temperature is lower than
the temperature in the room.
Dew on the surface of cabi-
net
Liquid sound
Condensation formed inside
the cabinet
According to the European waste regulation 2002/96/EG this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. by ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for the environment and hu-
man health, which could otherwiese be caused by inappropriate waste handling of
this product. For more detailled information about recycling of this product, please
contact your local council or your household waste disposial service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin.
11

Care and Maintenance

Troubleshoting
Solution
Check the wall socket by plugging in any type of electrical device,
and make sure that the on/off switch is in the "I" position.
If the compressor still does not start after taking steps 2 and 3, con-
tact your dealer.
The surface of wine cabinet especially the glass door will appear
some frost if the cabinet is installed in a damp room. This is due to
the moisture in the air coming into contact with the cabinet. Please
wipe it away with dry cloth.
It's a normal phenomenon if sound appears in these cases:
1. The sound of compressor when starts or stops working
2. The fl owing sound of refrigerant in the refrigeration system
3. The evaporating sound of refrigerant in the evaporator
If you are in the environment with high level of humidity or if the
door of wine cabinet has been left open for a long period or opened
frequently, wipe off the door and walls and leave the door closed as
long as possible.

Environment Concerns

Declaration of Conformity

This product is conform to the following European Directives:
2004/108/EC (EMC)
2011/65/EU (RoHS)
2006/95/EC (LVD)