Packing List - Sundstrom SR 700 Gebrauchsanleitung

Shelf life
The equipment has a shelf life of 5 years from the date
of manufacture. However, note that the battery must
be charged at least once a year.
Temperature range
• Storage temperature. Fig. 3.
• Service temperature. Fig. 4.
3. Use
3.1 Unpacking
Check that the equipment is complete in accordance
with the packing list and has not been damaged in
transit.

3.2 Packing list

Fig. 1.
No. Part
1. Fan SR 700, bare
2. Battery SR 701, 2,2 Ah
3. Battery charger SR 713
4. Belt PES SR 508
5. Particle filter SR 510 P3 R, 2x
6. Filter adapter
7. Pre-filter SR 221, 10x
8. Pre-filter holder
9. Flow meter SR 356
10. User instructions
11. Cleaning tissue SR 5226
12. Plug kit
3.3 Accessories
Fig. 2.
No. Part
1. Hood SR 561
2. Hood SR 562
3. Hood SR 520 M/L
3. Hood SR 520 S/M
4. Hood SR 530
5. Face shield SR 540
6. Face shield SR 570
7. Full face mask SR 200, PC-visor
7. Full face mask SR 200, glass visor
8. Half mask SR 900 S
8. Half mask SR 900 M
8. Half mask SR 900 L
9. Welding shield SR 590
10. Welding shield SR 592
12. Hose SR 550
12. Hose SR 551
13. Hose SR 951
14. Twin hose SR 952
15. Helmet with Visor SR 580
16. Steel net disc SR 336
17. Storage bag SR 505
18. Leather belt SR 503
19. Belt SR 508
19. Rubber belt SR 504
19. Belt PVC
20. Gasket to fan
21. Harness SR 552
22. Particle filter P3 R, SR 710
24
3.4 Filters
Read carefully the user instructions accompanying the
filters.
Particle filter
The fan unit may be used with only particle filters P3 R
(PAPR-P3), model number SR 510 with filter adapter
or SR 710, which provides protection against all types
of particles, both solid and liquid.
Note!
• When filters are changed, both filters must be
changed at the same time.
Pre-filter
The pre-filters SR 221 protect the main filter against
excessively fast clogging. The pre-filter holders also
protect the main filters against handling damage.
3.5 Assembly
a) Battery
• Remove and charge the battery. Fig. 5, 6, 7.
The charger carries out charging automatically in
three stages. Fig. 8.
1. Orange LED.
2. Yellow LED.
3. Green LED.
• Put the battery back. Fig. 9.
Warning!
• Always recharge the battery before it has become
fully discharged.
• The charger may be used only for charging the
batteries for the SR 700.
Ordering No.
• The battery may be charged only with a genuine
H06-5012
Sundström charger.
H06-5112
• The charger is designed only for use indoors.
H06-0212
• The charger must not be covered while it is in use.
H06-0312
• The charger must be protected against moisture.
H06-0412
• Never short circuit the battery.
H06-0512
• Never try to dismantle the battery.
H06-6512
• Never expose the battery to a naked flame. There is
H01-1212
risk of explosion/fire.
H01-1312
H01-3012
b) Belt
H01-3112
• Assemble the belt. Fig. 10, 11, 12.
H01-3212
Note!
H06-4012
Study the illustrations carefully to ensure that the belt
H06-4412
will not end up upside down or back to front.
T01-1216
T01-1218
c) Breathing hose
T01-3003
Read carefully the user instructions accompanying the
R01-3009
head top.
H06-8012
Full face mask SR 200
T01-2001
• Assemble the hose between Full face mask SR 200
T06-0102
and particle filter fan unit SR 700. Fig. 13, 14, 15.
T06-0103
• Check that the hose is firmly secured.
R06-0101
T06-0104
Half mask SR 900:
T06-0124
• Assemble the hose between half mask SR 900 and
R06-0107
particle filter fan unit SR 700. Fig. 16, 17.
T06-0116
• Check that the hose is firmly secured.
H02-1512
d) Particle filters
Two filters must always be used at the same time.
• Check that the gaskets in the filter mounting of the fan
unit are in place and are in good condition. Fig. 18.