Zoef Robot SR806W SJAAN Bedienungsanleitung Seite 50

Step 4: Make connection with the wifi
network ZoefRobot ..
Then go back to the APP
Operation APP
By pressing the picture or type number you
go to the further settings.
The Robot is equipped with a gyroscope. If the robot is programmed, it always uses this. That
means that if she has had everything back to the charging station. The duration of action is
therefore determined by the size of the room.
Step 5: Enter the details of your
home Wifi network. Press Next.
Uw Netwerk
Uw Netwerk wachtwoord
Here you can see the travelled
distance of the robot. Start and Stop
it and sent it to the charging station.
Press to operate manually
or choose different modes via ...
(upper right corner.)
20
When the installation is finished,
you will see the overview screen
below.
Here you can turn the robot on
and off or send it to the charging
station. The status of the battery is
also visible
When touched ....
You can also from here to planning
(Clean Reservation), Clean Record
(to see how much is vacuumed.)
Or Error notice when something is
wrong.