Scheduling - Zoef Robot SR806W SJAAN Bedienungsanleitung

D. Power off
a. Press the "ON/OFF" switch on the side of the robot to "OFF".
Product Operation

3. Scheduling

You can schedule the robot to make it start cleaning automatically at a certain time every day.
Scheduling by keys on the main body
Note: The robot can only be set when it's in Standby or Charging mode. If the robot is in sleep
mode, press
robot is in Cleaning mode, stop it before scheduling.
Schedule by the LED panel on robot
A. Setting Robot Clock
a. In standby or charging status, press
show the current system time.
b. Press
Press
c. Press
will flash. Press
d. Press
B. Setting the scheduling time
a. In standby or charging status, press
will show previous scheduled time or "00:00" if there is no schedule settled before.
b. Press
to increase hour or "WALL" to decrease it.
c. Press
panel will flash. Press
d. Press
C. Cancel the scheduling
a. Set the scheduling interval to 00:00.
b. Turn off the power switch on the right side of robot, and turn it on again after 3 seconds.
on main body or ON/OFF button on remote control to wake up the robot. If the
to enter the hour-setting mode, the left two numbers on LED panel will flash.
to increase hour or "WALL" to decrease it.
again to enter the minute-setting mode, the right two numbers on LED panel
to increase it or "WALL" to decrease it.
again to confirm the setting.
to enter hour-setting mode, the left two numbers on LED panel will flash. Press
again to enter the minute-setting mode and the right two numbers on LED
to increase minute or "WALL" to decrease it.
again to confirm the scheduling.
to start the clock-setting. The LED panel will
for two times to start scheduling, LED panel
9