Zoef Robot SR806W SJAAN Bedienungsanleitung Seite 45

Front anti-drop sensor detects cliff, front bumper right
EXXA
infrared sensor detects obstacle
Left and front anti-drop sensors detect cliff, front bumper
EXXB
right infrared sensor detects obstacle
Right anti-drop sensor detects cliff, front bumper right
EXXC
infrared sensor detects obstacle
Left and right anti-drop sensors detect cliff, front bumper
EXXD
right infrared sensor detects obstacle
Right and front anti-drop sensors detect cliff, front
EXXE
bumper right infrared sensors detect obstacle
Front, left and right anti-drop sensors detect cliff, front
EXXF
bumper right infrared sensors detects obstacle
Front bumper left infrared sensor detects obstacle
EX1X
Front bumper middle infrared sensor detects obstacle
EX2X
Front bumper left and middle infrared sensors detect
EX3X
obstacle
Front bumper right infrared sensor detects obstacle
EX4X
Front bumper left and right infrared sensors detect
EX5X
obstacle
Front bumper middle and right infrared sensors detect
EX6X
obstacle
Front bumper left, middle and right infrared sensors
EX7X
detect obstacle
Front bumper wall detection infrared sensor detects
EX8X
obstacle
Front bumper wall detection sensor and left infrared
EX9X
sensor detect obstacle
Front bumper wall detection sensor and middle infrared
EXAX
sensor detect obstacle
Front bumper wall detection sensor, left and middle
EXBX
infrared sensor detect obstacle
Front bumper wall detection sensors, right infrared
EXCX
sensor detect obstacle
Front bumper wall detection sensors, left and right
EXDX
infrared sensor detect obstacle
Front bumper wall detection sensors, right and middle
EXEX
infrared sensors detect obstacle
Front bumper wall detection sensors, left, right and
EXFX
middle infrared sensors detect obstacle
Troubleshooting
Troubleshooting for Motors
Error code
L01X Fan overloaded
Cause
15
Clean front bumper sensor lens
Solution
Check if fan is pressed, and clean dust
bin