Technical Data - IKEA DAGLIG Handbuch

ENGLISH
Problem
lights up on the timer
display.
If there is an error, first try to find a solution
to the problem yourself. If you cannot find a
solution to the problem yourself, contact
your IKEA store call centre. You can find a
full list of IKEA appointed contacts at the
end of this manual.

Technical data

Rating Plate
Made in Germany
© Inter IKEA Systems B.V. 1999
702.228.18
IKEA of Sweden AB
21552
SE - 343 81 Älmhult
The graphic above represents the rating
plate of the appliance (without serial
number which is specific for each product),
which is located at its underneath surface of
the casing.
Dear Customer, keep the additional rating
plate with the user manual. This will allow us
Possible cause
The second phase of the
power supply is missing.
Model DAGLIG Typ 60 HAD 56 AO 7,1kW
PNC 949 594 312 04 S NO ............... 220-240V AC 50-60 Hz
to assist you better, by identifying precisely
your hob, in case you will need in future our
assistance. Thank you for your help!
Remedy
Check if the appliance is
connected correctly to the
electrical supply. Remove
the fuse, wait for one minute,
and insert the fuse again. If
the problem continues, en-
sure a correct installation by
calling an authorised instal-
ler.
If you operated the appliance
wrongly, or the installation was
not carried out by a registered
engineer, the visit from the After
Sales Service technician or
dealer may not take place free
of charge, even during the
warranty period.
16
230 V
DGT