Intended Use; General Overview; Duty Of The Operator - Pfannenberg DTS 3000 115V serie Technisches Handbuch

1 : INTENDED USE

1.1 General overview

The Pfannenberg attachment and installation cooling units of the DTS series are stationary cooling units for the dissipation of
heat from switch cabinets.
The cooling units have different cooling outputs. For exact specifications power consumption, see Technical data. Use of
aluminum filters, fleece filters and fluted filters is possible with an additional adapter.
The cooling units are available with thermostat controllers. These controllers are regulating units for the adjustment of
refrigeration functions and operating data.
•
For detailed specifications for the controller, see and Operation.
Technical data
All Pfannenberg cooling units are ROHS-compliant and free from:
• Silicone connections
• PCT, asbestos, formaldehyde, cadmium
• Moisture-impairing substances

1.2 Duty of the operator

The operator must ensure that the cooling units are used exclusively as intended and dangers of all types to the life and
limb of users or third parties are avoided. In addition, accident prevention regulations and recognized safety rules are to be
observed.
The operator must ensure that all users have read and understood this operating manual. Non-observance of this operating
manual will void the warranty. The same applies if improper work has been carried out on the unit by the customer and/or
third parties without the approval of the manufacturer.
Page 4
| OPERATING MANUAL DTS Return To Table Of Contents