Battery Replacement - Monacor DMT-3050 Bedienungsanleitung

GB 5.5 Freezing in of a measured
value
1) To freeze in a measured value, press the
button DATA HOLD (2). The symbol
is displayed.
2) To cancel the hold function, press the but-
ton DATA HOLD again. The symbol
expires.
5.6 Manual setting of a measuring
range
1) To freeze in an automatically selected
measuring
RANGE HOLD (4). The symbol
displayed.
20
range, press the
2) With every new pressing of the button
RANGE HOLD the next higher measuring
range is selected. If the highest possible
measuring range is reached, the multime-
D H
ter is set back again to the lowest measur-
ing range.
3) To switch over to automatic selection of
D H
the measuring range, keep the button
RANGE HOLD depressed for more than 2
seconds. The symbol
6

Battery Replacement

If the batteries are exhausted, the symbol
is displayed. Two new batteries of the types
button
LR-44 or SR-44 must be inserted.
R H is
1) Turn the rotary switch (5) to position OFF.
R H expires.