EuroLite TMH-300 DMX Bedienungsanleitung Seite 36

PAN Reverse
With this function you can reverse the Pan movement.
TILT Reverse
With this function you can reverse the Tilt movement.
Adjust PAN/TILT speed
With this function you can define the PAN/TILT speed. You can select one of 15 different modes.
Fine resolution
With this function you can switch the device from 16 bit to 8 bit resolution.
The channels PAN Fine and TILT Fine will be disabled.
Lamp on or off
With this function you can switch the lamp on or off.
Reset
Restore factory settings
With this function you can restore the factory settings of the device. All settings will be set back to the default
values.
Clear lamp time
With this function you can clear the running time of the lamp. Please clear the lamp time every time you
replace the lamp. The password for this function is „123".
Reset
With this function you can Reset the device via the Control Board. The password for this function is „123".
Test function of each channel
With this function you can test each channel on its (correct) function.
Display
Display close time
With this function you can select if the display is permanently on (open) or if it shuts off automatically after 30
seconds.
Display intensity
With this function you can adjust the display intensity value from 1 (dark) to 4 (light).
Initial effect position
With this function you can adjust with which value the respective channels will start.
Reset
With this function you can Reset the device via the Control Board. The password for this function is „123".
Save current setting
With this function you can save the current setting. The password for this function is „123".
Operating mode, selecting internal programs
With this function you can select the DMX-controlled operation or stand alone operation.
You can select the internal programs and have them run sound-controlled. You can select one of 9 internal
programs under "Auto program run" and adjust the speed value between 1 to 15 under "Auto run speed".
Furthermore, you can set the device to slave mode.
36/38 00049059.DOC, Version 1.0