Foster FlexDrawer FFC6-2 Bedienungsanleitung Seite 7

GB
Before calling your supplier please make sure that:
a. None of the plugs have come out of the socket and the mains power supply is on i.e. are the
controller displays illuminated?
b. The unit is not in standby
c. The fuse has not blown
d. The counter is positioned correctly – controllable cold or warm air sources are not affecting the
performance
e. The condenser is not blocked or dirty
f. The products are placed in the unit correctly
g. Defrost is not in progress or required
h. The temperature is set to the desired set point for either fridge or freezer temperatures.
If the reason for the malfunction cannot be identified, disconnect the electrical supply to the unit and contact your
supplier. When requesting a service call, please quote the model and serial number which can be found on the
silver label located on the outside right hand side of the unit (starts E......).
5