Foster FlexDrawer FFC6-2 Bedienungsanleitung Seite 4

GB
User Adjustments
Check Storage Temperature Set Point
Per drawer display:
1/2 Second
Temperature Settings
The factory default temperature is +1˚C/+4˚C (fridge). To amend the drawer temperature from the factory default
to a -18˚C/-21˚C (freezer) follow the instructions below.
2 Seconds
Repeat above instruction to reset from fridge to freezer.
When changing drawer temperatures please ensure that all product has been unloaded and that the
counter is left for a minimum period of 1 hour to acclimatise to the new temperature.
For freezer temperatures only place already frozen product inside. This unit is not designed to freeze
down product.
Standby
Per drawer display:
3 Seconds
Defrost
Automatic -When set to freezer
temperature the drawer has a
totally automatic defrost system that
ensures the evaporator coil is clear
from ice.
Fridge
Manual Defrost - If required on
either fridge or freezer temperatures
a manual defrost can be initiated on
each drawer display.
Freezer
Indicator light
This will show while the unit is not
operating but still has mains power applied
to it. This mode may be used for interval
cleaning regimes and short periods when
the unit is not required. For extended
periods of inactivity the mains supply
should be isolated.
2 Seconds
goes out
2