Installer Setting - Setting Address Of Central Control; Installation Instructions; Installer Setting - Checking Address Of Central Control - LG PQWRCQ0FDB Installationsanleitung

Installation Instructions

Installer Setting - Setting Address of Central Control

Installer Setting - Checking Address of Central Control

When FUNCTION button pressed, press RESET button
1
2 Press the ON/OFF button toward the indoor unit 1 time, and the indoor unit will display the set
address in the display window.
- The address display time and method can differ by the indoor unit type.
Reset the remote controller to use the general operation mode.
3
1 With the MODE button pressed, press the RESET button.
2 By using the TEMPERATURE SETTING button, set the indoor unit address.
- Setting range : 00 ~ FF
Group No.
Indoor Unit No.
3 After setting the address, press the ON/OFF button toward the
indoor unit 1 time.
The indoor unit will display the set address to complete the address setting.
4
- The address display time and method can differ by the indoor uint type.
5
Reset the remote controller to use the general operation mode.
Installation Instruction
Owner's & Installation Manual 7