Auto Changeover Mode - Setting The Mode Change Temperature - LG PQWRCQ0FDB Installationsanleitung

Auto Changeover Mode - Setting the Mode Change Temperature

This Function is to set the operating mode of the Auto Changeover Mode.
1 In Auto Changeover Mode, Press FUNCTION button to select
Setting the Mode Change Temperature.
Press the TEMPERATURE SETTING button to set desired Mode Change Temperature.
2
(Default value is 2°C(4°F).)
The Mode Change Temperature is the difference of temperature when from cooling mode to heating mode or
from heating mode to cooling mode.
Ex) When setting temperature is 25°C(76°F) and room temperature is 20°C(68°F), then operating mode is
heating. If you set the mode change temperature to 2°C(4°F), when the room temperature up to
27°C(25°C + 2°C)(80°F(76°F + 4°F)), the unit start cooling operation.
To raise the temperature
❈ Mode Change Temp. Range
To lower the temperature
: 1~7°C(2~14°F)
Owner's & Installation Manual 13
Owner's Instruction