Auto Operation Mode - LG PQWRCQ0FDB Installationsanleitung

Auto Operation Mode

During Auto Operation Mode
• If the system is not operating as desired, manually switch to another mode. The system will not
automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must
set the mode and the desired temperature again.
1 Press the ON/OFF button.
The unit will respond with beep sound.
2 Press MODE button to select Auto Operation Mode.
3 Set the desired temperature.
<For Cooling Model>
The temperature and fan speed are automatically set by the
electronic controls based on the actual room temperature.
If you feel hot or cold, press TEMPERATURE SETTING buttons for
more cooling or heating effect.
You cannot switch the indoor fan speed. It has already been set by
the Auto Operation Mode rule.
To raise the temperature
To lower the temperature
<For Heating Model>
Owner's Instruction
You can set desired temperature and
indoor fan speed.
Setting Temp. Range : 18~30°C(64~86°F)
Owner's & Installation Manual 11
❈ Please select the code
depend on your feeling.
Code Feel
2 Cold
1 Slightly cool
0 Neutral
-1 Slightly warm
-2 Warm