Window Open" Function; Setting The Offset Temperature - elv ETH comfort Bedienungsanleitung

• To activate frost protection mode, turn the setting wheel
anticlockwise during manual operation (Manu) until "OFF"
appears on the display.
To terminate frost protection mode, quit manual opera-
•
tion (Manu) or turn the setting wheel clockwise.
If the room is being ventilated, the actuator controls the
temperature to save on heating costs. While this func-
tion is active, the "window open" symbol (
on the display.
Without window contact: The actuator will automati-
cally detect a significant drop in temperature due to ven-
tilation. You can set your own "window open" tempera-
ture and time.
With taught-in window contact: The temperature will
only be reduced during the time that the window is left
open. You can set your own "window open" temperature.
Press and hold down the menu button for more than
•
3 seconds.
• Use the setting wheel to select the "AEr" menu item.
Confirm with OK.
•
Use the setting wheel to set the temperature/time.
•
Then press OK to confirm.
• Without a taught-in window contact, this function can
be deactivated by selecting a time of "0".

24. Setting the offset temperature

The temperature is measured at the heating appliance it-
self, with the result that other parts of the room may be
warmer or colder than this. To allow for this, you can set
a temperature offset of ±3.5°C. If, for example, a temper-
ature of 18°C is measured somewhere within the room

23. "Window open" function

) appears
35