Display Content During Normal Operation; Teaching In Wireless Components - elv ETH comfort Bedienungsanleitung

14. Display content during normal operation

During normal operation, the following are dis-
played: day of the week, time of day, date, op-
erating mode, temperature setting and switch-
ing periods.
The bars indicating the weekly program's switching peri-
ods are shown for every other time interval. For an exam-
ple, please refer to "11. Weekly program: Examples".

15. Teaching in wireless components

The actuator supports the teaching in of up to 4 system
components (e.g. remote control and window contact plus
1 wall thermostat).
• Press and hold down the OK button for more than 3
seconds.
The remaining teach-in time will be displayed (30 seconds).
•
The device being taught-in now needs to send a wireless
•
signal (e.g. press button on remote control).
The display will then switch to the normal view.
•
Once this has been done, the actuator will respond to wire-
less commands from taught-in devices. Whenever the ac-
tuator receives a signal from a window contact or remote
control, the display will light up briefly.
31