Teaching Out Wireless Components; Operation With A Wall Thermostat - elv ETH comfort Bedienungsanleitung

16. Teaching out wireless components

Components that have been taught in on the actuator
can be taught out again using the "UnL" (Unlearn) func-
tion. All wireless components are taught out at once with
this function.
• Press and hold down the menu button for more than
3 seconds.
Use the setting wheel to select the "UnL" menu item.
•
Confirm with OK.
•
• "ACC" will appear on the display; press OK to confirm.

17. Operation with a wall thermostat

If the actuator is going to be operated in conjunction with
a wall thermostat, this thermostat will need to be taught in
(see section 15). Once it has been taught in, "ECF" will ap-
pear on the display. No further settings can then be made
on the actuator and it will no longer respond to taught-in
remote controls or window contacts.
If no wireless signal is received from the wall thermostat
for a period of 60 minutes, the actuator will exit ECF
mode.
It will then assume control of the temperature, which it will
continue to regulate in accordance with the weekly pro-
gram until the next wireless signal is received.
To teach out a wall thermostat, you must reinsert the bat-
teries in the actuator (wait for approx. 1 minute). Once you
have entered the date and time of day, you can use the
menu button (before the adjustment run is initiated) to per-
form the teach-out process as described in section 16.
32