Sanus VLL10 Handbuch Seite 4

1
Select TV Hardware and Mount TV Brackets
1-1
Select the hardware
A
1-2
Attach Brackets to a TV with a fl at back
4
diameter and length
Your TV type will help you determine which hardware confi guration to
use. Match your type of TV to the suggested hardware confi guration
on the next page.
A. Installation option without spacers (TVs with fl at backs)
B. Installation option using 14mm spacers (TVs with irregular backs)
C. Installation option using 24mm spacers (For TVs with irregular
backs that require more length than the 14mm spacer provides.)
Hand thread screws into the threaded inserts on the back of your TV
to determine the correct screw diameter (M4, M6, or M8).
damage! Verify that there are adequate threads to secure the brackets
to the monitor. If you encounter resistance, stop immediately
and contact customer service. Use the shortest screw and spacer
combination to accommodate your needs. Using hardware that is too
long may damage your TV.
B
In step 1 if you selected the:
M4 x 12mm screw [06] use the M4 washer [12].
M6 x14mm screw [08] use the M6/M8 washer [13].
M8 x16mm diameter screw [10] use the M6/M8 washer [13].
Confi rm that the brackets are level on the back of the TV.
If you require additional space for cables, recesses, or protrusions,
choose one of the confi gurations below.
CAUTION:
Avoid potential personal injuries and property
[02]
C
[12, 13]
[06, 08, 10]
6901-002034 <06>