Burner Setting - HEYLO K 120 Gas Bedienungsanleitung

13. Burner setting

13.1. Burner head setting (natural gas)
To set the air valve, undo the counternut (1) and turn the spindle (2).
The burner head is set by screw (3), and the pressure can be read from the scale (4). The gas
pressure of the burner head is measured at position (5). The data of the gas pressure applies for an
exhaust gas pipe of 1 m. In case of other exhaust gas systems, the gas pressure has to be adapted at
the burner head.
Preset:
Type of Heat
burner output
BS 3 111.6 kW
After every commissioning, readjust the air valve (exhaust air analysis).
Gas Dimensi
connection on A
/ " 31 mm
Gas pressure Air valve
burner head setting
5.7 mbar 2.8
31
Compressio
n
3
EN