Spectral CTA1-V2 Bedienungsanleitung Seite 50

Main menu
The remote control supplied has 8 function keys that can be used in different
ways for different operating modes. The upper and lower sections of the display
show the functions of each key.
The sources can be selected using the (upper) function keys lying directly above
them. If you have more than 3 sources you can use the scroll key to scroll on to
the next page and back.
The Volume (V+/-) can be used to adjust the volume of the sound system in all
menus (even when controlling IR devices) over 100 levels from 0 to 99.
Mute turns the volume off or on.
With <select> you can select one of the registered RF devices or a programmed
IR device. If more than 8 devices have been registered/programmed you can use
the scroll key to scroll to the devices that are not currently displayed.
With <preset> you can select your personal settings (6 memory cells) set in the
loudspeaker menu (refer to page 51).
50
+
V
-
bra1
ok
Select Device
dvd
exit
no configuration done
all inputs not active
to configure press ok
sel
sat tv light
m
input config
in opt1
in opt2
in coax1
in coax2
in line1
in line2
stand by
input config
n
n
n
n
n
n