System Description - Spectral CTA1-V2 Bedienungsanleitung

System description

The virtual surround systems CTA1/2 / BRA1 / CLA1 / VRA1 creates a rich and
full sound field that is normally only possible with 5.1 Systems.To achieve this
sound quality the individual channels of a multi-channel recording are put
through a special frequency-specific process and mixed onto two channels,
which then creates the impression of surround sound in the room. The result
is outstanding listening pleasure for minimum installation costs. The systems
have an integrated, RDS-enabled FM Tuner and adaptive remote control, which
can be used to control a second listening zone (Multiroom).
Pack contents virtual surround system CTA1 / BRA1:
1) One Speaker-Amplifier-Modul with integrated audio receiver
(including FM tuner)
2) One multi signal cable
3) Two optical cable
4) One aerial for VHF reception
5) One throw-out antenna for FM reception
6) One mains cable for the power supply of the Amplifier-Modul
7) One display-supported and easy to operate universal remote control
8) Three batteries (LR03 AAA 1,5V) for the remote control
Pack contents virtual surround system CLA1:
1) One Amplifier-Modul with integrated audio receiver (including a FM tuner)
2) Two satellit speakers
3) One signal cable
4) Two optical cable
5) One set loudspeaker cable for connecting the Amplifier-Modul
with the satellites
6) One mains cable for the power supply of the Amplifier-Modul
7) One throw-out antenna for FM reception
8) One aerial for VHF reception
9) One display-supported and easy to operate universal remote control
10) Three batteries (LR03 AAA 1,5V) for the remote control.
Pack contents virtual surround system CTA2:
1) One active subwoofer (CTA2-Amp) with integrated audio receiver (including an FM tuner)
2) One passive subwoofer (CTA2-Sub)
3) Two satellite speakers (CTA2-Sat)
4) One multi signal cable
5) Two optical cable
6) One set loudspeaker cable for connecting the Amplifier-Modul with the satellites and subwoofer
7) One mains cable for the power supply of the Amplifier-Modul
8) One throw-out antenna for FM reception
9) One aerial for VHF reception
10) One display-supported and easy to operate universal remote control
11) Three batteries (LR03 AAA 1,5V) for the remote control
Package Contents for VRA1 Virtual Surround System:
1) 1 active speaker module (right/active) with integrated audio receiver (including FM tuner)
2) 1 passive speaker module (left/passive)
3) 1 multi-line signal cable
4) 2 optical cables
5) 1 antenna cable
6) 1 aerial antenna for FM reception
7) 1 set of speaker cables for connecting between loudspeaker modules
8) 1 lead to power amplifier module
9) 1 display supported and easy-to-use universal remote control
10) 3 batteries (LR03 AAA 1.5 V) for the remote control
Positioning the system
The sound system is inserted into the furniture unit or sound base. The loudspeaker covers are then
attached. The CLA1 system is delivered already built in the furniture unit.
CTA1/VRA1: The sound system should be centrally located below the TV.
The CLA1 system is already inserted in the furniture.
CTA2: For perfect surround sound the satellite speakers should be placed left and right at the
furniture. The subwoofer should be placed below or in the middle of the furniture.
BRA1: The BRA1 system should be placed into the BRICK sound base.
CLA1: At the backside of the loudspeakers are bass reflex holes that emit rearwards. For
achieving a perfect sound the system should be placed with a minimum distance of
5 cm to the wall.
41