Spectral CTA1-V2 Bedienungsanleitung Seite 46

Connecting source devices
The SPECTRAL sound system offers a variety of connection options for all standard source devices, such as DVD players, video recorders, satellite receivers, multimedia
consoles (Playstation®, X-Box®, ...) etc. To do so, the audio connections of your source devices are connected to the corresponding terminals on the back of the Amplifier-
Modul. Source devices with a digital output for Dolby Digital and DTS Bitstreams should also be connected digitally to the sound system. This guarantees full Dolby
Digital and DTS sound quality.
The video signal connections are made directly between the source devices and the image display device.
The image source to be used is selected directly from the menu of the image display device.
In order to use the integrated FM Tuner of the sound system you need to connect the aerial supplied to the appropriate socket on the sound system.
Better reception will be achieved if the aerial is extended. For optimal reception we recommend connection to a broadband cable network or a roof-mounted aerial
using the coaxial cable supplied.
Before you can start using the sound system for sound reproduction you need to go through the initial installation process and assign the inputs to the source devices.
You will be asked to do this automatically when you first switch on the device (refer to page 46).
To adjust the parameters of the conncetions please use the system menu of the remote control (refer to page 53).
Important: Only connect your active Amplifier-Modul to the mains once all connections to the other audio/video components have been made.
You can then turn the power switch to the „ON" position.
46