Description Of The Device; Features - Futurelight PHP-21 TCL Bedienungsanleitung

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.

DESCRIPTION OF THE DEVICE

Features

Versatile Moving Head Effect with 3.5 W Multichip LEDs
• Equipped with 21 x 3.5 W LEDs: RGB
• Through the close chip placement of the multichip technology, an exquisite color mix even with short
distances to the illuminated surface is guaranteed
• 100 000 hours LED life
• DMX-controlled operation or stand alone operation with Master/Slave-function
• Exact positioning via 16 bit Pan/Tilt movement resolution
• Strobe effect
• Stepless RGB colour changing
• Rainbow-effect with adjustable speed
• Masterdimmer
• PAN-angle switchable between 630° and 540°
• 48 preprogrammed scenes in Program Run for stand alone operation
• Number of scenes in Program Run can be changed individually
• The scenes in Program Run can be modified via the Control Board or via an external controller and loaded
into the memory
• 8 built-in programs can be called up via DMX-controller
• Sound-controlled via built-in microphone
• Advantages of LED-technology: extremely long life, low power consumption, minimal heat emission,
defacto maintenance free with brilliant light radiation
• Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-
Reverse, Program, Reset
• DMX-control via every standard DMX-controller
27/44 00035683.DOC, Version 1.0