Santec SPVM-xxAC series Bedienungsanleitung Seite 68

5.4.17 Title
This is used to set-up the ID figures and position on the screen (title setting).
:
Horizontal start position. Use the [UP] and [DOWN] keys to move the cursor to
the selected position. Press the [ENT] key to set the position. After that, use
the [UP] and [DOWN] key to move the cursor to the select character. Press
[ENT] to set the character to the selected position.
POSITION: Set the title display to OFF or move its position by using [UP] or [DOWN].
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.
5.4.18 Priority
This is used to set the Priority to OSD menu or automatic control.
VR PRIORITY:
SWITCH PRIORITY:
After the setting has been completed, press [ENT] to save the adjustments. After that press
the [PRI] key to go back to the main menu page.
_________________________________________________________________________________
The iris level is set to be controlled by the OSD menu or
automatically by the camera.
The function control is set to be controlled by the OSD men or
automatically by the camera.
- 68 -
Bedienungsanleitung / User Manual SPVM-20AC / SPVM-26AC / SPVM-32AC