Lenze Drive PLC Montageanleitung Seite 48

Show/Hide Bookmarks
Commissioning
7
Tip!
The software "Global Drive Control easy" is included on the CD-ROM "Drive PLC
Developer Studio".
The full version of "Global Drive Control" can be obtained from Lenze, with ordering
number ESP-GDC 2.
A description of parameter setting with the keypad can be found in the instructions
that are supplied with every keypad.
The code table can be found in the online documentation of Drive PLC Developer
Studio (DDS).
Display of operating status
Two LEDs at the front of the instrument indicate the operating status of the Drive PLC:
LED
green
x
blinks at 0.5 second intervals
off
on
blinking every second
x LED state has no significance
48
Operating status
red
blinking Fault: TRIP
off PLC program not loaded
off PLC program loaded
off PLC program running
off PLC program loaded but paused
EDK10200EV3 DE/EN/FR 6.0
Abb. 1-23
L