Connecting And Installing Dometic Smart D - Dometic Smart D Montage- Und Bedienungsanleitung

Connecting and installing Dometic Smart D

6 Connecting and installing
Dometic Smart D
6.1 Notes on installation
A
NOTICE!
Dometic Smart D must only be installed and connected by
qualified personnel who are familiar with the relevant VDE
(German Engineering Society) regulations.
When selecting the installation location for the devices, observe the following
instructions:
 The devices must be installed in a place that is protected from moisture.
 Do not install the devices in a dusty environment.
 The device must be installed on a level and sufficiently sturdy surface.
 Do not install the devices on the ceiling.
 Do not forget to take the length of the cable into account.
 Lay the cables in the cable channels.
 Secure the connected cables using suitable fittings, e.g. cable clamps, to
ensure the plug cannot be pulled off.
42
Dometic Smart D
EN