Acoustic Signals - Dometic Smart D Montage- Und Bedienungsanleitung

Dometic Smart D
7.3 Menu symbols
Symbol in
fig. 0, Explanation
page 7
Main menu (chapter "Main menu" on page 54)
The main menu is used for switching frequently used functions on
and off, e.g. lights and pumps.
Air conditioning menu (chapter "Air conditioning unit menu" on
page 55)
The air conditioning menu is used for making settings for up to two
integrated air conditioning units.
This menu is only displayed if at least one air conditioning unit is
connected.
Heating menu (chapter "ALDE heater menu" on page 56)
The heating menu is for used for making settings to ALDE heaters.
Information menu (chapter "Information menu" on page 58)
The information menu shows information about the water tanks
and the connected batteries.
Settings menu (chapter "Settings menu" on page 59)
The settings menu is used for configuring the system.
7.4

Acoustic signals

The control panel makes you aware of the following events by means of
acoustic signals when the vehicle engine is started:
 230 V mains voltage is connected
 the aerial is extended
 external water is connected
In addition to this, an acoustic signal sounds if an alarm is triggered.
EN
Operating Dometic Smart D
53