Installing The Control Unit; Choosing The Location - Dometic AH Serie Montage- Und Bedienungsanleitung

AH-Elite Control
The AH-Elite Control display is available in two different sizes:
fig. 9
• Elite Idea:
fig. 0
• Elite Eikon:
6.1 Input and indication elements
No. in
fig. 1, page 3
1
2
3
4
5
6
7
8
9
10
11
12
13
7

Installing the control unit

7.1

Choosing the location

The display panel's built-in air sensor can only work accurately when properly
located and installed.
The display panel should be mounted on an inside wall slightly higher than mid-
height of the cabin to allow the sensor to sense the average temperature.The mount-
ing place should feature the following properties:
• No direct sunlight
• Free air circulation (not in corners or behind doors)
EN
, page 7
, page 7
Explanation
Power button
Temperature sensor
Digital display
Manual fan indicators (high, medium, low)
Auto fan indicator
Auto mode indicator
Cool mode indicator
Heat mode indicator
Moisture mode indicator
Mode button
Fan button
Down button – lower temperature set point
Up button – raise temperature set point
Installing the control unit
11