Settings Menu - Dometic Smart D Montage- Und Bedienungsanleitung

Dometic Smart D
7.9

Settings menu

Symbol in
fig. f, Explanation
page 9
Brightness of display
Sets the brightness of the display (see chapter "Setting brightness
of the display" on page 60).
Time and Date
Sets the time and date.
Calibrates the tank level display
Set the tank level display (see chapter "Calibration menu for ana-
logue filling level sensors (float)" on page 61).
Time zone
Sets the time zone.
Charger
Displays the status of the charger
I/O card signals
Displays which signals are active on the I/O cards (see chapter
"Signal menu" on page 61).
Fresh water pump block
Blocks the fresh water pump, e.g. if an installed regulating switch
does not also switch off the fresh water pump.
Alarms
Displays the alarms (see chapter "Alarm menu" on page 61).
Language
Sets the language (see chapter "Language menu" on page 62).
SmartD_14 Program name
Displays the name of the program currently running
Citywater, Fresh water intake
Freshwater-
Sets the source for the fresh water intake.
Tank 1, Fresh-
waterTank 2
EN
Operating Dometic Smart D
59