Options; Safety; Remote Display Option; Aquamatic/End Of Charging/Cumulative Error Options - Fronius Selectiva Plus E Bedienungsanleitung

Accessing the
Info menu, over-
view
(continued)

Options

Safety

Remote display Operation of the charger via the remote display works in exactly the same way as on
option the charger multifunction panel.
Green LED
flashes when charging has terminated correctly
Yellow LED
flashes during charging
Red LED
flashes if an error occurs
Aquamatic/end of The Aquamatic option incorporates
automatic actuation of a solenoid valve to
charging/cumula-
automatically fill the battery with water.
tive error options
The end of charging option is used to
activate a signal lamp. When charging is
complete, the NO contact closes auto-
matically.
The cumulative error option can be used to
activate a signal lamp.
The NO contact closes automatically
whenever a fault (ERROR) is detected,
with the exception of Error 12 „phase
failure".
(1) Charger
(2) Aquamatic/Charging
Equalisation charging delay time
Only for characteristics with equalisation charging
Electrolyte circulation menu activated
Electrolyte circulation menu deactivated
WARNING! Operating the equipment incorrectly can cause serious damage.
The options described must only be put into operation by trained and quali-
fied personnel. In addition to the safety rules in the operating instructions, the
safety rules of the battery and vehicle manufacturers must also be followed.
over/Collective
fault/cumulative error options
(1)
N
L
4 A T
Fig. 4 Aquamatic/Charging over wiring diagram/
Collective
8
(2)
X 7/3
X 7/4
X 7/PE
fault/cumulative error options