Installation - Electrolux TG080N11 Benutzerinformation

Problem
A rectangular symbol
is shown on the right
side of the Tempera-
ture Display
8.1 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to

"Installation".

9. INSTALLATION
WARNING!
Read the "Safety Information" care-
fully for your safety and correct op-
eration of the appliance before in-
stalling the appliance.
9.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor (garage or cellar) also,
but for optimum performance install this
appliance at a location where the ambient
temperature corresponds to the climate
9.2 Levelling
Possible cause
Temperature sensor prob-
lem
3.
class indicated on the rating plate of the
appliance:
Cli-
mate
class
SN
N
ST
T
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front.
Solution
Call the service personnel
If necessary, replace the defective door
gaskets. Contact the Service Center.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
ENGLISH 59